This MDMA (Molly/Ecstasy) purity test is a quick test that will give you an idea about the purity of your MDMA sample. Use it after you’ve tested your sample with the MDMA (Ecstasy/Molly) test, which gives an indication of whether or not MDMA is present in the first place.
Dealers sometimes cut MDMA to increase their profit margins. With this test, you’ll be able to find out whether and how much your MDMA has been cut. As a general guideline, you can say that when there’s a high percentage of MDMA present in the sample, you’re close to the top source, which means less potentially dangerous cutting agents.
MDMA Purity Test Kit Includes
- 10 MDMA purity tests
- 10 spatulas
- Instruction sheet
Please use only 20 mg (a tiny amount) of your sample. If you use too much, the results will be skewed! When comparing different samples, test using the same quantity from each. You can use the materials that come with the kit to help you get the right amount. However, for best results, use a scale to weigh the exact amount of powder. You can buy a good portable digital scale from here:
Test samples from different sources at the same time, so that you can more easily compare results. Take pictures of the test results under the same lighting and with the same camera. Use the pictures to compare with results from future tests.
When MDMA has been cut with some substances, other reactions may occur. This test gives some reactions to cutting agents which may alter the colors. Here is a list of substances that may interfere and their reactions:
|Benzocaine||Very light yellow color of the bottom layer no color on change on the top layer. (MDMA only colors the top layer)|
|BZP||Bright yellow top layer, gives residue on the sides of the ampoule in between the two layers. (MDMA does not give this residue)|
|mCPP||Bright yellow-orange top layer, gives residue on the sides of the ampoule in between the two layers. (MDMA does not give this residue)|
|MDA||Same reactions as MDMA|
|Paracetamol (Acetaminophen)||Yellow top and bottom layers (MDMA only colors the top layer)|
|Phenacetin||Yellow top and bottom layers (MDMA only colors the top layer)|
|TFMPP||Bright yellow top layer, gives residue on the sides of the ampoule in between the two layers. (MDMA does not give this residue)|
If one of these reactions is observed, the purity of the substance cannot be determined with this test. This is because these substances interfere with the color development of the test. Therefore the purity cannot be accurately determined.
MDMA Purity Test Instruction Video
Note: This test does not require the use of a buffer solution as shown in the above video. MDMA colors the top layer in the ampoule, not the bottom layer. Scale and ampoule rack are not included, but you can get them separately.
No drug (whether legal or illegal) is completely safe, we recommend avoiding all recreational drug use.